Analisis kerapuhan struktur gedung Dinas Pertanian Kabupaten Pacitan dengan static adaptive pushover
Abstract
Information from BMKG indicates an increase in earthquake occurences in Pacitan Regency in recent years, a phenomenon that has been noticeable to the local community. Considering that the building of the Pacitan District Agriculture Office has been standing for about five years, a structural performance analysis is needed to ensure the building's strength in resisting earthquake damage. This research aims to investigate the structural response of a building when subjected to structural analysis due to deformation caused by dynamic seismic forces using the Seismostruct software. In this study, an adaptive pushover method was developed, considering the stiffness and modal characteristics of the structure at different levels of inelasticity to update the distribution of lateral loads. This method also considers the location-specific spectrum for load scaling. The results showed that this new approach yielded static analysis results that closely approximated inelastic dynamic analysis and could predict the structural response in detail. The existing building structure will be modeled as a structure, including column and beam frames with material specifications and dead and live loads, based on data obtained following SNI 1726:2012 regulations. The structural behavior analysis will be conducted using the static adaptive pushover method. From this research, the maximum value of the capacity curve for the building under study occurred at a base shear of 2070.595 kN and a displacement of 0.060971 m. The converted spectral displacement was found to be 0.47 m with a slight limit state of 100%, a moderate limit state of 100%, an extensive limit state of 99%, and a complete limit state of 71%.
References
Antoniou, S., & Pinho, R. (2004). Advantages and limitations of adaptive and non-adaptive force-based pushover procedures. Journal of earthquake engineering, 8(04), 497-522.
Antoniou, S., Rovithakis, A., & Pinho, R. (2004). Development and Verification of a Fully Adaptive Pushover Procedure. Journal of Earthquake Engineering, 1-3.
Bencana, B. N. (2021). Indeks Resiko Bencana Indonesia. Jakarta: Pusat Data, Informasi dan Komunikasi Kebencanaan Badan Nasional Penanggulangan Bencana.
Bracci, J. M., Kunnath, S. K. and Reinhorn, A. M. [1997] “Seismic performance and retrofit evaluation of reinforced concrete structures,” Journal of Structural Engineering 123(1), 3–10
Devi, R. H. (2020). Seismic Capacity of Low-to-Mid Rise Reinforced Concrete Buildings Retrofitted with CFRP. National Central University, 3-34.
Devi, R. H., & Sangadji, S. (2022). Pengaruh Faktor Lingkungan Internal dan Agresif Terhadap Kolom Retrofit dengan CFRP dan GFRP. Wahana Teknik Sipil: Jurnal Pengembangan Teknik Sipil, 27(2), 189-198.
Direktorat Bina Teknik Permukiman dan Perumahan Direktorat Jenderal Cipta Karya Kementerian Pekerjaan Umum dan Perumahan Rakyat. (n.d.). Grafik Respon Spektra. Retrieved Juli 13, 2022, from Desain Spektra Indonesia: http://rsa.ciptakarya.pu.go.id/
(FEMA), F. E. (2010). HAZUS-MH MR5 Technical Manual - Earthquake Model. U.S. Department of Homeland Security.
Geologi, B. (n.d.). Analisis Geologi Kejadian Gempa Bumi Di Perairan Selatan Provinsi Jawa Timur, Tanggal 17 Juli 2022. Retrieved Juli 18, 2022, from https://vsi.esdm.go.id/index.php/gempabumi-a-tsunami/kejadian-gempabumi-a-tsunami/3986-analisis-geologi-kejadian-gempa-bumi-di-perairan-selatan-provinsi-jawa-timur-tanggal-17-juli-2022
Gupta, B., & Kunnath, S. K. (2000). Adaptive spectra-based pushover procedure for seismic evaluation of structures. Earthquake spectra, 16(2), 367-391.
HAZUS-MH MR 5. (2010). Washington, D.C.
Muto, K. 1963. Analisis Perancangan Gedung Tahan Gempa. Terjemahan oleh Wira. 1990. Erlangga. Jakarta.
Pawirodikmoro, Widodo. 2012. Seismologi Teknik dan Rekayasa Kegempaan. Pustaka Pelajar. Yogyakarta.
Pratama, D. T. A. (2014) Analisis Peran Sektor Unggulan Dalam Perekonomian Kabupaten Pacitan Periode 2007-2011. UNS-F. Ekonomi Jur. Ekonomi Pembangunan-F.0110043-2014. Surakarta.
Saruddin, S. N. A., & Nazri, F. M. (2015). Fragility curves for low-and mid-rise buildings in Malaysia. Procedia Engineering, 125, 873-878.
(SNI), S. N. (2019). Tata Cara Perencanaan Ketahanan Gempa untuk Struktur Bangunan Gedung dan Nongedung SNI 1726:2012. Jakarta.
Standar Nasional Indonesia (SNI). (2020). Beban Desain Minimum dan Kriteria Terkait untuk Bangunan Gedung dan Struktur Lain SNI 1727:2020. Jakarta.
Authors who publish with this journal agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).