RISIKO K3 PADA PELAKSANAAN KONSTRUKSI BANGUNAN GEDUNG SWASTA

  • Ni Kadek Sri Ebtha Yuni Jurusan Teknik Sipil, Politeknik Negeri Bali, Badung, Bali
  • I Nyoman Suardika Jurusan Teknik Sipil, Politeknik Negeri Bali, Badung, Bali
  • I Wayan Sudiasa Jurusan Teknik Sipil, Politeknik Negeri Bali, Badung, Bali
DOI: https://doi.org/10.22225/pd.10.2.2849.317-324
Keywords: construction projects, occupational health and safety, project risks

Abstract

Project risks sourced from the environment, planning, financial, technical, humane, criminal, and safety. The purpose of this study to identify the safety and health risks of building construction on structural and architectural work, determine the value of risk based on the results of identification, determine risk control based on the hierarchy of risk control. This research was conducted on a private construction project on structural and architectural work. The method used is interviews and surveys. Surveys were conducted to obtain risk identification, and interviews to respondents. There were 28 identified risks, 11 risks were in the mild category and 17 were moderate risks. This risks are controlled by tool box meetings, managing work positions, placement of materials and tools, installing signs, work permits, using helmets, shoes, safety belts, gloves, and masks.

References

Abryandoko, E. W. (2018). Penilaian Risiko Keselamatan dan Kesehatan Kerja dengan Menggunakan Metode HIRADC dan Safety Policy. Universitas Bojonegoro.

Anonim. (2014). Peraturan Menteri PU No.05/PRT-M/2014 tentang Pedoman Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3) Konstruksi Bidang Banguan Umum. Lembaran Negara RI. Jakarta: Sekreteriat Negara Republik Indonesia.

Astiti, N. P. M., Norken, N., & Purbawijaya, I B. N. (2015). Analisis Risiko Pelaksanaan Pembangunan Jalan Tol Benoa-Bandara-Nusa Dua. Jurnal Spektran, 3 (2).

Brahmatariguna, I. A. (2016). Hubungan Kompetensi Project Manager Terhadap Keberhasilan Proyek Konstruksi Gedung. Jurnal Spektran, 4 (2).

Djatmiko. (2016). Keselamatan dan Kesehatan Kerja, Edisi 1. Yongyakarta: Penerbit Deepublish.

Husen, A. (2011). Manajemen Proyek, Perencanaan, Penjadwalan, & Pengendalian Proyek. Yogyakarta: Andi.

Latupeirissa, J. E. (2016). Metode Perencanaan Evaluasi dan Pengendalian Pelaksanaan Proyek, Edisi 1. Yogyakarta: Andi.

Nurhayati. (2010). Manajemen Proyek Konstruksi, Cetakan pertama. Yogyakarta: Andi Offset.

Norken, I N. (2015). Pengantar Analisis Manajemen Risiko Proyek Konstruksi. Denpasar: Udayana University Press.

Persada, Y. B. (2015). Risk Asesment K3 pada Proses Pengoperasinalan Skafolding pada Proyek Apartemen PT X di Surabaya. The Indonesian Journal of Occupational Safety and Health, 4 (2).

Purba, E. A., Kurnia B., M. A., Hatmoko, J. U. D., & Kistiani, F. (2015. Analisa Manajemen Risiko pada Proyek PDAM Semarang (Studi Kasus: Proyek Pemipaan IPA Kaligarang Semarang Barat). Jurnal Karya Teknik Sipil, 4(4), 274-282.

Sari. N. (2016). Manajemen Risiko Keselamatan dan Kesehatan Kerja pada Pekerjaan Konstruksi. Universitas Tanjungpura.

Setiawan, P. F. (2014). Manajemen Risiko Proyek Vale di PT. Multipanel Intermitra Mandiri. Journal uajy.

Sucita. I. K., & Broto. A. B. (2011). Identifikasi dan Penanganan Risiko K3 pada Proyek Konstruksi Gedung. Politeknologi, 10 (1).

Susihono, W., & Rini, F. A. (2013). Penerapan Sistem Manajemen Keselamatan dan Kesehatan Kerja (K3) dan Identifikasi Potensi Bahaya Kerja (Studi Kasus di PT. LTX Kota Cilegon- Banten). Jurnal Spektrum Industri, 11(2), 117–242.

Published
2021-12-20
Issue
Vol. 10 No. 2 (2021)
Section
Articles

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Abstract viewed = 1861 times
PDF downloaded = 8048 times