PERENCANAAN SISTEM PLAMBING DAN HIDRAN KEBAKARAN PADA PROYEK PEMBANGUNAN HOTEL PESONA ALAM

  • Ivana Patricia Lilipaly Jurusan Teknik Sipil, Universitas Jember, Jember, Jawa Timur
  • Ririn Endah Badriani Jurusan Teknik Sipil, Universitas Jember, Jember, Jawa Timur
  • Yeny Dhokhikah Jurusan Teknik Sipil, Universitas Jember, Jember, Jawa Timur
DOI: https://doi.org/10.22225/pd.10.2.2818.266-279
Keywords: plumbing, fire hydrant, pipe diameter, clean water requirement

Abstract

Pesona Alam Hotel is one of the hotels located in the Cisarua area, Bogor. An adequate plumbing system and fire hydrant system planning are needed to support the Comfort and safety of hotel visitor activities. The Plumbing Tool Load Unit Method is used in determining the dimensions of both clean and wastewater. Isometric depiction of piping networks and determining the diameter of clean water pipes is assisted by Pipe Flow Expert software. Based on the calculation, it is found that the need for clean water per day at Pesona Alam Hotel is 230 m3/day with the required diameter of clean water pipes of 0.5", 0.75", 1", 1.25", and 2". The estimated wastewater produced is 207 m3/day with a diameter of 1.25", 1.5", 2", 2.5", 3" and 4" wastewater. Whereas for the fire hydrant system, 3 types of fire hydrants are used, namely the pillar hydrant, fire hose reel, and sprinkler. The need for clean water for fire fighting is 270 m3.

References

Affandi, J., Pharmawatu, K., & Nurprabowo, A. (2016). Perencanaan Sistem Instalasi Plambing Air Bersih Gedung Hotel Tebu. Jurnal Rekayasa Lingkungan Institut Teknologi Nasional, 4(2), 1-9.

Anonim. (2000a). SNI 03-1745-2000: Tata cara perencanaan dan pemasangan system pipa tegak dan slang untuk pencegahan bahaya kebakaran pada bangunan rumah dan gedung. Jakarta: Badan Standarisasi Nasional.

Anonim. (2000b). SNI 03-3989-2000: Tata cara perencanaan dan pemasangan sistem sprinkler otomatik untuk pencegahan bahaya kebakaran pada bangunan gedung. Jakarta: Badan Standarisasi Nasional.

Anonim. (2000c). SNI 03-6481-2000: Sistem Plambing. Jakarta: Badan Standarisasi Nasional.

Anonim. (2005).SNI 03-7065-2005: Tata Cara Perencaaan Sistem Plambing. Jakarta: Badan Standarisasi Nasional.

Anonim. (2015). SNI 8153-2015: Sistem Plambing pada Bangunan Gedung. Jakarta: Badan Standarisasi Nasional.

Artayana, K. C. B., & Atmaja, G. I. (2010). Perencanaan Instalasi Air Bersih dan Air Kotor pada Bangunan Gedung dengan Menggunakan Sistem Pompa. Jurnal Ilmiah Teknik Mesin Universitas Udayana, 4(1), 51-56.

Aurumbinang, E. I. (2018). Perencanaan Perpipaan Air Bersih Dan Air Buangan Pada Proyek Pembangunan Meotel Jember.

Mahardika, P. (2018). Evaluasi Instalasi Plumbing Air Bersih Rumah Tipe 42 Menggunakan Pipe Flow Expert Berdasarkan SNI 03-4065-2005 dan BS 6700. Jurnal Teknologi Terapan, 4(1), 1-6.

Noerbambang, S. M., & Morimura, T. (1993). Perencanaan dan Pemeliharaan Sistem Plambing. Jakarta: PT. Pradnya Paramita.

Published
2021-12-16
Issue
Vol. 10 No. 2 (2021)
Section
Articles

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Abstract viewed = 832 times
PDF downloaded = 3565 times