Steps for Online Submission

After having username/password for logging in into Journal of Infrastructure Planning and Engineering, the author will be brought into online author submission interface where the author should click new submission or click here in the start new submission section.

Step 1 Starting The Submission: The author should check-mark the journal check list and it should be appropriate with the articles content. The author can give comment to the editor in the comments for editor section.

Step 2 Uploading The Submission: To upload the manuscript into the journal, click browse/choose file on the upload submission file and choose the manuscript document file (.doc/.docx) to be submitted, then click upload button until the file has been uploaded.

Step 3 Entering Submissions Metadata: In this step, detail authors metadata should be entered including marked corresponding author. After that, manuscript title and abstract must be uploaded by copying the text and paste in the textbox including keywords.

Step 4 Uploading Supplementary Files: Supplementary file should be uploaded if authors have an additional file for support the article. Therefore, click on Browse button, choose the files, and then click on Upload button. If there is no supplementary files to be uploaded just click save and continue button.

Step 5 Confirming The Submission: Author should final check the uploaded manuscript documents in this step. To submit the manuscript to Journal of Infrastructure Planning and Engineering, click Finish Submission button after the documents are true. The corresponding author or the principal contact will receive an acknowledgment by email and will be able to view the submission’s progress through the editorial process by logging in to the journal web address site.

After this submission, Authors who submit the manuscript will get a confirmation email about the submission. Therefore, Authors are able to track their submission status at any time by logging in to the online submission interface. The submission tracking includes a status of manuscript review and editorial process.

 

Author Guideline

All manuscripts must be submitted to Journal of Infrastructure Planning and Engineering Editorial Office by Online Submission at E-Journal portal address. Where author register as Author. If authors have any problems on the online submission, please contact Editorial Office at the following email jipe.mril.unwar@gmail.com. Manuscript must be written in English at least 6 pages and 15 pages of maximum including picture, table, diagram, and references. The manuscript should be written based on the Journal of Infrastructure Planning and Engineering template.

Manuscript Template

Manuscript should be prepared according to the template which can be downloaded on the JIPE portal.

Reviewing Manuscript

Every submitted paper is independently reviewed by reviewer. The decision for publication, amendment, or rejection is based upon their reports/recommendation. If the reviewer consider a manuscript unsuitable for publication in this journal, a statement explaining the basis for the decision will be sent to the authors within three months of the submission date.

Revision Manuscript

Manuscripts sent back to the author for revision should be returned to the editor without delay. Revised manuscripts can be sent to editorial office through the Online Submission Interface. The revised manuscripts returned later than three months will be considered as new submissions.

Manuscript Preparation Guideline

All manuscript submitted into Journal of Infrastructure Planning and Engineering is checked and decided by the Editor. The manuscript which is not appropriate with the Journal of Infrastructure Planning and Engineering format will be rejected. The manuscript which is appropriate with Journal of Infrastructure Planning and Engineering format will be accepted and confirmed through email by Editor.

Manuscript Format

The manuscript which is submitted into Journal of Infrastructure Planning and Engineering should contain at least with 6-15 pages with format like (the template can be downloaded on the Journal of Infrastructure Planning and Engineering portal):

1. Introduction
2. Data and Methods
3. Results and Discussions
4. Conclusion
5. Acknowledgement
6. References

Manuscript Title

18 pt Badoni MT, align justify, bold, line spacing single, spacing before 30 pt, spacing after 12 pt.

Author Detail

Name (12 pt Cambria Math, align justify, bold, line spacing single, spacing before 12 pt, spacing after 6 pt).

Affiliation (9 pt Cambria Math, align justify, line spacing single).

Corresponding author email (9 pt Cambria Math, align justify, line spacing single).

Abstract and Keywords

The abstract briefly contains a description of the problem and research objectives, methods used, the principal results, and major conclusions. Abstract consists of a maximum of 300 words. The abstract is not part of the text and should be complete in itself; no table numbers, figure numbers, references or displayed mathematical expressions should be included.

Abstract Heading (11 pt Cambria Math, align justify, bold, line spacing single, spacing before 0 pt, spacing after 6 pt).

Abstract Body (9 pt Cambria Math, align justify, line spacing single).

Keywords Heading (9 pt Cambria Math, align justify, bold, line spacing single, spacing before 10 pt, spacing after 0 pt).

Keywords Body (9 pt Cambria Math, align justify, line spacing single, spacing before 10 pt, spacing after 0 pt).

Introduction

The introduction should briefly place the study in a broad context and highlight why it is important. It should define the purpose of the work and its significance. The current state of the research field should be carefully reviewed and key publications cited. Explain how you addressed the problem and clearly state the aims of your study. As you compose the introduction, think of readers who are not experts in this field. Mention of references in the manuscript uses a number system, for example: [1], [1, 2], [1-4], [1, 4-6] or [1-3, 7-10].

Heading/1. Introduction (11 pt Cambria Math, align justify, bold, line spacing single, spacing before 12 pt, spacing after 3 pt).

Body (10 pt Cambria Math, align justify, line spacing single, spacing before 2 pt, spacing after 2 pt, indented first line 0.75 cm).

Data and Methods

It should be mention time or place or study location of research in first part. All data and methods that used for analysis, treatment and experimental design must be stated clearly and briefly. State the objectives of the work and provide an adequate background, avoiding a detailed literature survey or a summary of the results. A theory section should extend, not repeat, the background to the article already dealt with in the Introduction and lays the foundation for further work. A calculation sections represents a practical development from a theoretical basis.

Heading/2. Data and Methods (11 pt Cambria Math, align justify, bold, line spacing single, spacing before 12 pt, spacing after 3 pt).

Body (10 pt Cambria Math, align justify, line spacing single, spacing before 2 pt, spacing after 2 pt, indented first line 0.75 cm).

Sub Heading/2.1 Data (10.5 pt Cambria Math, align justify, bold, line spacing single, spacing before 6 pt, spacing after 3 pt).

Body (10 pt Cambria Math, align justify, line spacing single, spacing before 2 pt, spacing after 2 pt, indented first line 0.75 cm).

Results and Discussion

The result and discussion must be written in the same part. They should be presented continuously starting from the main result to the supporting results and equipped with a discussion. The unit of measurement used should follow the prevailing international system. This section may be divided by subheadings. It should provide a concise and precise description of the experimental results, their interpretation, as well as the experimental conclusions that can be drawn.

Heading/3. Results and Discussion (11 pt Cambria Math, align justify, bold, line spacing single, spacing before 0 pt, spacing after 3 pt).

Body (10 pt Cambria Math, align justify, line spacing single, spacing before 2 pt, spacing after 2 pt, indented first line 0.75 cm).

Sub Heading/3.1 Results (10.5 pt Cambria Math, align justify, bold, line spacing single, spacing before 6 pt, spacing after 3 pt).

Body (10 pt Cambria Math, align justify, line spacing single, spacing before 2 pt, spacing after 2 pt, indented first line 0.75 cm).

Conclusion

The main conclusions of the study may be presented in a short Conclusions section, which may stand alone or form a subsection of a Discussion or Results and Discussion section. Suggestion placed after conclusion contains a recommendation on the research done or an input that can be used directly by consumer.

Heading/4. Conclusion (11 pt Cambria Math, align justify, bold, line spacing single, spacing before 0 pt, spacing after 3 pt).

Body (10 pt Cambria Math, align justify, line spacing single, spacing before 2 pt, spacing after 2 pt, indented first line 0.75 cm).

Acknowledgement

Acknowledgements heading should be left justified, bold, with the first letter capitalized but have no numbers. Text below continues as normal. In this section, you can acknowledge any support given which is not covered by the author contribution or funding sections. This may include administrative and technical support, or donations in kind (e.g., materials used for experiments).

Heading/Acknowledgement (11 pt Cambria Math, align justify, bold, line spacing single, spacing before 0 pt, spacing after 3 pt).

Body (10 pt Cambria Math, align justify, line spacing single, spacing before 2 pt, spacing after 2 pt, indented first line 0.75 cm).

References

Articles should contain at least 15 references, 80% from international journal articles and preferably have been published not more than 10 years. References must be numbered in order of appearance in the text (including citations in tables and legends) and listed individually at the end of the manuscript. We recommend preparing the references with a bibliography software package, such as Mendeley or EndNote to avoid typing mistakes and duplicated references. Include the digital object identifier (DOI) for all references where available. The citation and references style used in this article is the Institute for Electrical and Electronics Engineers (IEEE). We suggest to used reference manager like Mendeley, Zotero, End Note, etc to facilitate you in citation.

Heading/References (11 pt Cambria Math, align justify, bold, line spacing single, spacing before 0 pt, spacing after 3 pt).

Body (8 pt Cambria Math, align justify, line spacing single, indented hanging 0.7 cm).

Examples of citations for different materials:

Reference to a journal article:

[1] G. Liu, K. Y. Lee, and H. F. Jordan, "TDM and TWDM de Bruijn networks and shufflenets for optical communications," IEEE Trans. Comp., vol. 46, pp. 695-701, June 1997.

Reference to a book:

[2] D. Sarunyagate, Ed., Lasers. New York: McGraw-Hill, 1996.

Reference in conference paper:

[3] L. Liu and H. Miao, "A specification based approach to testing polymorphic attributes," in Formal Methods and Software Engineering: Proceedings of the 6th International Conference on Formal Engineering Methods, ICFEM 2004, Seattle, WA, USA, November 8-12, 2004, J. Davies, W. Schulte, M. Barnett, Eds. Berlin: Springer, 2004. pp. 306-19.

Reference in conference proceedings:

[4]  T. J. van Weert and R. K. Munro, Eds., Informatics and the Digital Society: Social, ethical and cognitive issues: IFIP TC3/WG3.1&3.2 Open Conference on Social, Ethical and Cognitive Issues of Informatics and ICT, July 22-26, 2002, Dortmund, Germany. Boston: Kluwer Academic, 2003.

Reference to a thesis/dissertation:

[5] O. Williams, “Narrow-band analyzer,” Ph.D. dissertation, Dept. Elect. Eng., Harvard Univ., Cambridge, MA, 1993.

Reference to a standard:

[6]  IEEE Criteria for Class IE Electric Systems, IEEE Standard 308, 1969.

Reference in newspaper article (from database/web):

[7]  Riley, "Call for new look at skilled migrants," The Australian, p. 35, May 31, 2005. [Online]. Available: Factiva, http://global.factiva.com. [Accessed May 31, 2005].