The design of the flat slab system with drop panel in the Sukawati market building

  • Dewa Ngakan Made Dwiva Cahyana Department of Civil Engineering, Warmadewa University, Denpasar, 80235, Indonesia
  • I Nengah Sinarta Master Program of Infrastructure and Environmental Engineering, Warmadewa University, Denpasar, 80235, Indonesia
  • I Putu Ellsa Sarassantika Department of Civil Engineering, Warmadewa University, Denpasar, 80235, Indonesia
DOI: https://doi.org/10.22225/jipe.1.2.2022.75-80
Keywords: drop panel, dynamic analysis, flat slab, structure system

Abstract

Sukawati Market Building has 4 floors and 1 basement with a total building area of 1136.16 m2. It was designed to use a flat slab structure system with the addition of drop panels that maintained the height or story clearance while reducing total building height by eliminating the interior beams. The structure was designed follow the Indonesian Standard for reinforced concrete building design guideline and assessed through finite element simulation. The shear capacity of the flat slab was determined by the strength of the concrete and its dimensions. The reinforcing bar of flat slabs with drop panels is determined in the same way as the reinforcing bar of concrete slabs. Based on the results, the design efficiently resists the forces demand while meeting the deflection requirement, reflecting the structure system's safety and serviceability. The structure system also maintains the total height of the building in order to comply with local high-limit regulation.

References

I. N. Sinarta and I. M. B. Pinandika, “Comparison Of Pushover Method And Direct Displacement Method In Earthquake Load Analysis With Performance-Based Design Concepts,†Ukarst Univ. Kadiri Ris. Tek. Sipil, vol. 4, no. 2, 2020.

I. W. M. Andreasnata, I. N. Sinarta, N. K. Armaeni, and I. P. E. Sarassantika, “Column structure strengthening with FRP (Fiber Reinforced Polymer) due to story addition,†J. Infrastrcuture Plan. Engfineering, vol. 1, no. 1, pp. 38–45, 2022.

I. N. Sinarta and I. W. A. Basoka, “Safety factor analysis of landslides hazard as a result of rain condition infiltration on Buyan-Beratan Ancient Mountain,†J. Phys. Conf. Ser., vol. 1402, no. 2, 2019.

I. P. Ellsa Sarassantika, “Perencanaan Gedung the Samator Superblock dengan Elemen structure beton pratekan parsial paska tarik,†Institut Teknologi Sepuluh Nopember, 2015.

D. Evlin and I. N. Sinarta, “Prestressed beam system due to the addition of a long-span beam in building infrastructure,†J. Infrastruct. Plan. Eng., vol. 1, no. 1, pp. 27–32, 2022.

C. B. Casita, I. P. E. Sarassantika, and R. Sulaksitaningrum, “Behaviour of Rectangular Concrete Filled Tubes and Circular Concrete Filled Tubes under Axial Load,†J. Appl. Sci. Manag. Eng. Technol., vol. 1, no. 1, pp. 14–20, 2020.

Peraturan Daerah Provinsi Bali Nomor 16 Tahun 2009: Rencana Tata Ruang Wilayah Provinsi Bali. 2009.

S. Borkar, K. Dabhekar, I. Khedikar, and S. Jaju, “Analysis of Flat Slab Structures in Comparison with Conventional Slab Structures,†IOP Conf. Ser. Earth Environ. Sci., vol. 822, no. 1, 2021.

A. Rahman Asy-Syifa and dan Johannes Tarigan, “Analisa Flat Slab Dengan Memakai Drop Panel Kolom Persegi Dengan Variasi Pembebanan Life Load,†J. Tek. Sipil USU, vol. 1, no. 1, 2017.

D. Z. Yankelevsky, Y. S. Karinski, A. Brodsky, and V. R. Feldgun, “Dynamic punching shear of impacting RC flat slabs with drop panels,†Eng. Fail. Anal., vol. 129, no. April, p. 105682, 2021.

Badan Stadandarisasi Nasional-BSN, SNI 2847-2019 : Persyaratan beton struktural untuk bangunan gedung dan penjelasan, no. 8. 2019.

Computer and Structures.Inc (CSI), “ETABS.†Computer and Structures, Inc (CSI), 2013.

ATKINS, “Manual for Analysis & Design Using ETABS.†.

2020 SNI 1727, “Beban desain minimum dan Kriteria terkait untuk bangunan gedung dan struktur lain 1727:2020,†Badan Standarisasi Nas. 17272020, no. 8, pp. 1–336, 2020.

Badan Standardisasi Nasional, “Tata Cara Perencanaan Ketahanan Gempa Untuk Struktur Bangunan Gedung dan Non Gedung,†Sni 17262019, no. 8, p. 254, 2019.

Published
2022-10-25
Issue
Vol. 1 No. 2 (2022)
Section
Articles

Authors who publish with this journal agree to the following terms:

1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Abstract viewed = 243 times
PDF downloaded = 509 times